Current Version

Not sure if you have an up to date version of one of our products...no big deal.  Just check out the Help/About section of your software product and then see if we have an upgrade path listed below.  It's easy and fun.

(1.63 Megs)

This is a cumulative patch update that fixes bug and adds one new feature. It adds the ability to use marker names as file names when chopping files.

Here is a complete list of fixes:

• Increases temp file limit and adds warnings if you have have many temp files.
• Fixes EzClean low frequency attenuation at zero attenuation.
• Fixes EzClean display of hiss level when bypassed
• Fixes Virtual Valve Amp filter strange behavior with some settings
• Changes Find and Mark Silent passages to place markers in the middle of the marker area.
• Extended minimum time between markers on Find and Mark Silent Passages to 99 seconds from 40.
• Adds progress bar and cancel button to Save As in Fast Edit mode
• Fixes Batch file editor so that it really will overwrite the Source files. This works regardless of the "Use Dest Dir" checkbox, which is different than before. This allows you to re-use the same list of files with a different filter, sort of like chaining operations.
• Fixes the Spectrum Analyzer Clear button when dual display mode is selected.
• Fixes the Median filter with Odd width values and a weighting other than zero.
• Fixes the Batch File editor and Playlist editor total times with 24bit files.
• Fixes the XY display logic for the Left and Right channels.
• Fixes the Timer record so it would wrap past midnight.
• Fixes the DirectX plug-in filter so it works properly with 24-bit files.
• Adds full support for 32-bit floating point file types.
• Changes I/O card preferences so two instances of DC SIX can use different sound card settings; such as two different inputs on a multi-track sound card.
• Fixes the Freeze button on the Continuous Noise Filter so that it works if you stop the filter and preview again.
• Adds an option to switch to the older FFT algorithm for systems that have experienced crashing
• Fixes incorrect display using Fast Edit with 24-bit mono files.
• Fixes page up and page down keys to work correctly at the beginning and end of files.
• Adds wait cursor and status text while rebuilding a peak file.
• Fixes program exit bug. If you close the program and answer cancel to the "Do you want to save?" Question, the program would exit anyway.
• Fix Save after program exits. If you answer yes to save the file after closing the program, the main window stays displayed until the program exits. Previously it disappeared.
• Fix and record bug. If you save a newly recorded file as an existing name, the .pkf files and .ses file were not deleted,
• Fixes a DirectX plug-in filter bug on some filters like reverbs that would never end.
• Fixes the wait cursor while saving, copying and resampling.
• Fixes the File Save-As after a recording. If you overwrote an existing file, the previous session file would not be deleted, which confused the view of the new file.
• Fixes the File Conversion filter offset adjustment with high sample rate files, and doubled the available file offset on higher sample rate files.
• Fixes chop file dialog. Changing name suffix would gray out the base name field for no good reason.
• Fixes Chop File dialog when deleting the original file. The file would remain open in the editor even though it was deleted.
• Adds feature to use the marker labels as file names when chopping files into pieces.
• Fixes missing menu item "EzClean Filter" in DC SIX. It was missing only when no files were opened.
• Fixes the operation of the Left only and Right only selection boxes. They had reversed channels on the Echo and Adaptive filters and did not work at all on the Declipper and in the Multifilter.
• Fixes the TD Adaptive filter Keep Residue. It would not get saved in the presets.
• Fixes many VVA presets

(1.35 Megs)

This is a cumulative patch update that fixes many bugs and adds the ability to use marker names as file names when chopping files.

Here is a complete list of fixes:

• Increases temp file limit and adds warnings if you have have many temp files.
• Fixes EzClean low frequency attenuation at zero attenuation.
• Fixes EzClean display of hiss level when bypassed
• Fixes VVA filter strange behavior with some settings
• Changes Find and Mark Silent passages to place markers in the middle of the marker area.
• Makes the Spectral filter re-sizable, it also remembers its last size.
• Extends minimum time between markers on Find and Mark Silent Passages to 99 seconds from 40.
• Adds progress bar and cancel button to Save As in Fast Edit mode
• Fixes Batch file editor so that it really will overwrite the Source files. This works regardless of the "Use Dest Dir" checkbox, which is different than before. This allows you to re-use the same list of files with a different filter, sort of like chaining operations.
• Fixes the Spectrum Analyzer Clear button when Dual Display mode is selected.
• Fixes the Median Filter with odd width values and a weighting other than zero.
• Fixes the Batch File editor and Playlist editor total times with 24-bit files.
• Fixes the XY display logic for the Left and Right channels.
• Fixes the Timer record so it would wrap past midnight.
• Fixes the DirectX plug-in filter so it works properly with 24-bit files.
• Adds full support for 32-bit floating point file types.
• Changed I/O card preferences so two instances of DC SIX can use different sound card settings, such as two different inputs on a multi-track sound card.
• Fixes the Freeze button on the Continuous Noise Filter so that it works if you stop the filter and preview again
• Adds an option to switch to the older FFT algorithm for systems that have experienced crashing
• Fixes incorrect display using Fast Edit with 24-bit mono files.
• Fixes page up and page down keys to work correctly at the beginning and end of files.
• Adds wait cursor and status text while rebuilding a peak file.
• Fixes program exit bug. If you close the program and answer cancel to the "Do you want to save?" question, the program would exit anyway.
• Fix Save after program exits. If you answer yes to save the file after closing the program, the main window stays displayed until the program exits. Previously it disappeared.
• Fix Save and record bug. If you save a newly recorded file as an existing name, the .pkf file and .ses file were not deleted
• Fixes a DirectX plug-in filter bug on some filters like reverbs that would never end.
• Fixes the wait cursor while saving, copying and resampling.
• Fixes the File Save-As after a recording. If you overwrote an existing file, the previous session file would not be deleted, which confused the view of the new file.
• Doubled the size of the offset in the DSS filter. It can now do +/-350ms at 192k, 24-bit.
• Fixes the File Conversion filter offset adjustment with high sample rate files, and doubled the available file offset on higher sample rate files.
• Fixes Chop File dialog. Changing name suffix would gray out the base name field for no good reason.
• Fixes Chop file dialog when deleting the original file. The file would remain open in the editor even though it was deleted.
• Adds feature to use the marker labels as file names when chopping files into pieces.
• Fixes missing menu item "EzClean Filter" in DC SIX. It was missing only when no files were opened.
• Fixes the operation of the Left only and Right only selection boxes. They had reversed channels on the Echo and Adaptive filters and did not work at all on the Declipper and in the Multifilter.
• Fixes the Spectral filter using Left only or right only filtering. It would leave a small glitch at the end of the file.
• Fixes the Time Domain Adaptive filter Keep Residue. It would not get saved in the presets.
• Fixes many VVA presets

(1.6 Megs)

• Fixed the EZClean and CNF crashing bug on some systems with Norton AV
• Fixed display channel swapping problem on 24 bit files
• Fixed File SAVE AS with a different sample rate.  Would occasionally end up with a blank file
• Fixed differences in settings of the Impulse Noise filter between Preview and Running
• Fixed small initial thump in the 20 band EQ
• Fixed EZ Clean hum filter display colors for 50 and 60 Hz
• Fixed EZ Clean hum filter in Mono Mode
• Fixed missing Brick Wall filter presets

(900K)

• Fixed the EZClean and CNF crashing bug on some systems with Norton AV
• Fixed display channel swapping problem on 24 bit files
• Fixed File SAVE AS with a different sample rate.  Would occasionally end up with a blank file
• Fixed differences in settings of the Impulse Noise filter between Preview and Running
• Fixed small initial thump in the 20 band EQ
• Fixed EZ Clean hum filter display colors for 50 and 60 Hz
• Fixed EZ Clean hum filter in Mono Mode
• Fixed missing Brick Wall filter presets

DC FIVE Patch to 5.03 

• Added a display amplitude scale in either dB, percentage or samples

• Clear all selected markers

• Pitch scaling offset control to adjust start and stop in equal amounts

• Delete key will delete the selected marker

• Multiple display drawing and scaling fixes

• Filters in the MultiFilter and Batch File editor are now in alphabetical order instead of the semi-random order they were in

This patch will only update version 4.64.  If you have a previous version of the software, you should get the patch below first and then install this one.  This is a self extracting exe file, so all you need do is download it and run it...it will find your copy of Millennium and fix it up good.  This will also copy a Readme.txt file in the installation directory so you know just what we fixed.  Contact us with questions.

This patch will also place a new preset file call dcMillPresets.ini in the installation directory.  This file contains new presets for the new filters.  It was not automatically installed in the Windows directory because it will overwrite all of your existing presets.  If you want to use this new preset file, you should copy it to your Windows directory, but make a backup copy of your current Windows\dcMillpresets.ini file first.  

This patch will update DC LIVE/Forensics version 5.03, 5.14, or 5.15 to version 5.22.  This patch is cumulative and can update multiple versions.  The Readme contains full bug fix and feature information, but here are some of the highlights:

• Added a display amplitude scale in either dB, percentage or samples

• Clear all selected markers

• Pitch scaling offset control to adjust start and stop in equal amounts

• Delete key will delete the selected marker

• Multiple display drawing and scaling fixes

• Filters in the MultiFilter and Batch File editor are now in alphabetical order instead of the semi-random order they were in

 Diamond Cut 32 3.06 to 3.09