Cable Pak 4- AP192 Balanced Connections

This kit is designed to help you quickly and easily connect your Audiophile 192 sound card to any basic audio setup. Here's what we're assuming. You are plugging some sort of balanced pro audio gear into the sound card. For output, plugging into a mixer board or pro audio monitors.

If you're not sure what setup your system has, be sure to review our Cables Page.

This kit includes:

• 4 1/8" to 1/8" 12 Foot Patch Cables
• 8 Stereo 1/4" to 1/8" Stereo Female Adapter Plugs

We've included a diagram below to make this process as painless as possible.

1. We're going to take 2 of the 1/8" stereo patch cables and put one 1/4"stereo to 1/8" female adapter plugs on each cable end. We'll plug one end of each cable into the left and right Main Output Cables on the Audiophile 192 sound card. The other end of both of these cables will be plugged into the inputs of your mixer board or powered monitors.
2. We're going to take the other 2 1/8" stereo patch cables and put the remaining four 1/4" to 1/8" female adapter plugs on all four cable ends. Each cable will be plugged into the 1/4" Line Inputs on the sound card and the other ends of each cable will be plugged to the balanced outputs of your audio gear.