Small enough to fit in your pocket, Transit brings hi-resolution 24-bit/96kHz recording and playback to any USB-compatible computer. Digital I/O lets you transfer pristine audio between your computer and other devices such as MiniDisc and DAT. The digital output can deliver AC-3 and DTS from your computer to an external decoder such as a surround receiver. And the bus-powered design allows you play and record virtually anywhere your laptop can go. Transit is your ticket to ride.

Important Features

• Mobile 24-bit/96kHz USB audio upgrade
• Stereo analog/optical digital input (1/8” )
• Stereo line/headphone output (1/8”)
• TOSlink optical digital output allows AC-3 and DTS pass-through
• Accommodates self-powered stereo microphones

The Specifications

Here are additional specs for those of you who love details. Most of these specs come directly from the manufacturers.

General

Line/Mic In

• Signal To Noise- 100 dB (typical, A-weighted)
• Dynamic Range- 100.4dB (typical, -60dB, A-weighted) (A/D)
• THD+N- 0.00316% (typical)
• Maximum Input Voltage- +6dBV

Line Out

• Dynamic Range- 104dB (typical, -60dB input, A-weighted)
• Signal to Noise Ratio- 104dB (typical, A-weighted)
• THD+N- 0.00316% (typical)
• Maximum Output Voltage- 0dBV
• Size/weight- 5-1/4” x 5” x 7/8”; 0.2 lbs.

Compatibility

• ASIO 2
• MME
• Sound Manager
• DirectX
• OMS

Requirements

• Windows 98SE / Me / 2000 (SP4) / XP (SP1 or higher)*
• For 96kHz operation: Pentium III 500mHz w/ 128MB RAM
• For 48kHz operation: Pentium II 400 w/ 128MB RAM

* Home and Professional Edition only. Windows Media Center Edition is not currently supported.